Soy nuevo en ngspice e intento simular mi primer circuito. He publicado mi spice.net y mi simulation.cmd a continuación con una imagen de mi esquema. Cuando ejecuto la simulación, aparece el mensaje de error:
malloc: error interno no puede asignar -8 bytes.
¿Alguien sabe cuál podría ser el problema?
Gracias
* gnetlist -g spice-sdb -o spice.net v-monitor.sch
************************************************** *******
* Spice file generated by gnetlist *
* spice-sdb version 4.28.2007 by SDB -- *
* provides advanced spice netlisting capability. *
* Documentation at http://www.brorson.com/gEDA/SPICE/ *
************************************************** *******
*vvvvvvvv Included SPICE model from /home/matt/Documents/gEDA/model/BC108.mod vvvvvvvv
.MODEL BC108 NPN(Is=1.8E-14 Ise=5.0E-14 Nf=.9955 Ne=1.46 Bf=400
+ Br=35.5 Ikf=.14 Ikr=.03 Isc=1.72E-13 Nc=1.27 Nr=1.005
+ Rb=.56 Re=.6 Rc=.25 Vaf=80 Var=12.5
+ Cje=13E-12 Cjc=4E-12 Vjc=.54 Mjc=.33
+ Tf=.64E-9 Tr=50.72E-9)
* ST pid=23 case=TO18
*^^^^^^^^ End of included SPICE model from /home/matt/Documents/gEDA/models/BC108.mod ^^^^^^^^
*
*vvvvvvvv Included SPICE model from /home/matt/Documents/gEDA/models/BC178.mod vvvvvvvv
.model BC178 pnp(IS=3.50E-15 VAF=80.5 BF=330 IKF=0.1018 NE=1.3140
+ ISE=3.816E-16 IKR=0.03 ISC=5.00E-13 NC=1.6 NR=1 BR=5 RC=0.35
+ CJC=8.80E-12
+ FC=0.5 MJC=0.28 VJC=1 CJE=1.00E-11 MJE=0.38 VJE=0.4 TF=7.00E-10
+ ITF=0.6 VTF=3 XTF=11.5 RB=100 IRB=0.0001 RBM=10 RE=0.75
+ TR=2.00E-07)
*
*^^^^^^^^ End of included SPICE model from /home/matt/Documents/gEDA/models/BC178.mod ^^^^^^^^
*
*============== Begin SPICE netlist of main design ============
.INCLUDE /home/matt/Documents/gEDA/Simulation.cmd
Vcc Vcc 0 DC 15V
Rnb 4 3 4K
Rpb 2 5 22K
Q2 1 5 Vcc BC178
Vpulse 4 0 pulse 0 5 1m 1u 1u 1m 3m
Q1 2 3 0 BC108
R2 0 Vout 1K
R1 Vout 1 2K
.end
P
* .AC DEC 20 1Hz 100MegHz
.DC Vpulse 0 5 .01
* .DC VINPUT 1 2 .01
.plot dc v(Vout) v(Vin)
.print dc v(Vout) v(Vin)
