Hace poco compré un SSD muy barato, realmente ($ 25.99), y abrí el estuche por curiosidad.
Los chips flash han grabado barras en los números de pieza, algo que nunca antes había visto.
¿Esestaunaformaestándardemarcarfichascomorechazadas?
Editar:comprédosdeellosparacolocarlosenRAID-1,porquenoconfíodemasiadoenellos,yelotrotienemarcasidénticas:
EsteutilizaelflashMicron,aunquelamarcaesidéntica.
Enestepunto,solopuedopensarquedebeserunintentorealmente,realmente,realmenteineficazdeocultarlosnúmerosdereferenciadelosflashes.
LaspartesdemicrassonMT29F128G08CBECBH6-12:C
,queesunapartede16GB,porloquehay64GBdealmacenamientosinformato.
LasotraspartestienenlamarcaFBNL95B71KDBABH6-10AL
, que también son partes de 16 GByte.
Editar:
La primera de las unidades pasó sudo badblocks -b 4096 -c 4096 -s -w /dev/sdm
sin error, por lo que aparentemente la capacidad es real , y son buenos para al menos una escritura.
Editar edición:
Corrección: O bien badblocks
está fallando mi adaptador USB-sata de el-cheapo, o tienen tienen algunos problemas.
Editar editar editar:
Ok, ejecutar badblocks
en la unidad parece haber confundido horriblemente el disco. Aquí está el informe SMART:
durr@mainnas:/media/Storage/badblocks⟫ sudo smartctl /dev/sdm -a
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-79-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: KingDian S200 60GB
Serial Number: 2016022700031
LU WWN Device Id: 0 000000 000000000
Firmware Version: 20150818
User Capacity: 60,022,480,896 bytes [60.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Sun Mar 20 19:15:31 2016 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 050 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0002 100 100 050 Old_age Always - 0
9 Power_On_Hours 0x0000 100 100 050 Old_age Offline - 2
12 Power_Cycle_Count 0x0000 100 100 050 Old_age Offline - 6
160 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 0
161 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 125
162 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 1
163 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 20
164 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 4943
165 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 12
166 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 1
167 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 4
192 Power-Off_Retract_Count 0x0000 100 100 050 Old_age Offline - 6
194 Temperature_Celsius 0x0000 100 100 050 Old_age Offline - 40
195 Hardware_ECC_Recovered 0x0000 100 100 050 Old_age Offline - 0
196 Reallocated_Event_Count 0x0000 100 100 050 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 6
241 Total_LBAs_Written 0x0000 100 100 050 Old_age Offline - 2857
242 Total_LBAs_Read 0x0000 100 100 050 Old_age Offline - 72
245 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 9517
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 1
ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 0 occurred at disk power-on lifetime: 21930 hours (913 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 03 ff 93 01 00 ce
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
03 00 00 00 00 00 b9 00 00:00:00.288 CFA REQUEST EXTENDED ERROR
00 00 00 00 00 00 01 00 00:00:00.000 NOP [Abort queued commands]
00 00 b3 01 18 00 08 00 00:00:00.000 NOP [Abort queued commands]
00 02 01 00 00 00 00 4c 16:05:33.861 NOP [Reserved subcommand] [OBS-ACS-2]
03 00 07 00 00 00 ce 00 00:18:34.183 CFA REQUEST EXTENDED ERROR
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 f0 d0 3e 44 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 01 00 4f c2 a0 00 00:00:00.000 SMART READ DATA
b0 d5 01 01 4f c2 a0 00 00:00:00.000 SMART READ LOG
b0 d5 01 00 4f c2 a0 00 00:00:00.000 SMART READ LOG
b0 da 00 00 4f c2 a0 00 00:00:00.000 SMART RETURN STATUS
b0 d1 01 01 4f c2 a0 00 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 0 -
Selective Self-tests/Logging not supported
En este punto, he tenido la unidad alrededor de una semana. No tengo idea de cómo ha tenido errores hace 918 días.
Adicionalmente: Error -4
. Sí, no creo que los registros SMART deban tener números negativos. Whoops?
En este punto, si vuelvo a probar la unidad con badblocks, el dispositivo se desconecta y se vuelve a conectar.
durr@mainnas:/media/Storage/badblocks⟫ dmesg | tail -n 50
[2048975.197941] sd 12:0:0:0: [sdm] Mode Sense: 28 00 00 00
[2048975.198218] sd 12:0:0:0: [sdm] No Caching mode page found
[2048975.198728] sd 12:0:0:0: [sdm] Assuming drive cache: write through
[2048975.200188] sd 12:0:0:0: [sdm] No Caching mode page found
[2048975.200633] sd 12:0:0:0: [sdm] Assuming drive cache: write through
[2048975.214949] sdm: unknown partition table
[2048975.215831] sd 12:0:0:0: [sdm] No Caching mode page found
[2048975.216456] sd 12:0:0:0: [sdm] Assuming drive cache: write through
[2048975.216915] sd 12:0:0:0: [sdm] Attached SCSI disk
[2049068.016741] usb 3-5: reset high-speed USB device number 16 using xhci_hcd
[2049068.036966] usb 3-5: device firmware changed
[2049068.037001] usb 3-5: USB disconnect, device number 16
[2049068.040592] scsi 12:0:0:0: rejecting I/O to offline device
[2049068.041057] scsi 12:0:0:0: [sdm] killing request
[2049068.041063] scsi 12:0:0:0: [sdm]
[2049068.041064] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[2049068.041065] scsi 12:0:0:0: [sdm] CDB:
[2049068.041066] Read(10): 28 00 00 44 3e d0 00 00 f0 00
[2049068.041070] end_request: I/O error, dev sdm, sector 4472528
[2049068.041520] scsi 12:0:0:0: rejecting I/O to offline device
[2049068.041974] scsi 12:0:0:0: [sdm] killing request
[2049068.042017] scsi 12:0:0:0: [sdm]
[2049068.042018] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[2049068.042018] scsi 12:0:0:0: [sdm] CDB:
[2049068.042019] Read(10): 28 00 00 44 3f c0 00 00 f0 00
[2049068.042022] end_request: I/O error, dev sdm, sector 4472768
[2049068.056652] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801781c3c80
[2049068.056654] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801781c3cc0
[2049068.168511] usb 3-5: new high-speed USB device number 17 using xhci_hcd
[2049068.259417] usb 3-5: New USB device found, idVendor=152d, idProduct=2329
[2049068.259420] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[2049068.259421] usb 3-5: Product: USB to ATA/ATAPI bridge
[2049068.259422] usb 3-5: Manufacturer: JMicron
[2049068.259423] usb 3-5: SerialNumber: 201602270003
[2049068.291104] usb-storage 3-5:1.0: USB Mass Storage device detected
[2049068.291152] usb-storage 3-5:1.0: Quirks match for vid 152d pid 2329: 8020
[2049068.291179] scsi13 : usb-storage 3-5:1.0
[2049069.322875] scsi 13:0:0:0: Direct-Access KingDian S200 60GB 2015 PQ: 0 ANSI: 2 CCS
[2049069.323058] sd 13:0:0:0: Attached scsi generic sg12 type 0
[2049069.384321] sd 13:0:0:0: [sdm] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[2049069.384601] sd 13:0:0:0: [sdm] Write Protect is off
[2049069.384603] sd 13:0:0:0: [sdm] Mode Sense: 28 00 00 00
[2049069.384868] sd 13:0:0:0: [sdm] No Caching mode page found
[2049069.385353] sd 13:0:0:0: [sdm] Assuming drive cache: write through
[2049069.386764] sd 13:0:0:0: [sdm] No Caching mode page found
[2049069.387311] sd 13:0:0:0: [sdm] Assuming drive cache: write through
[2049069.396568] sdm: unknown partition table
[2049069.397466] sd 13:0:0:0: [sdm] No Caching mode page found
[2049069.398067] sd 13:0:0:0: [sdm] Assuming drive cache: write through
[2049069.398513] sd 13:0:0:0: [sdm] Attached SCSI disk
De vuelta a Amazon van, supongo. Creo que veré si puedo convencer al otro para que también falle, antes de devolverlos.
Editar editar editar editar:
Sí, la segunda unidad simplemente se atascó cuando se probó de la misma manera. Whoops?